|
|
||
|
|
|||
|
Smoked Lens Covers |
|||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|||
|
Most products are available in 7 different colors: |
|
|
|
|
|
|
||
|
Frequently Asked Questions: |
|||
| Why
should I buy Lamin-X material from Big Worm Motorsports? Big Worm Motorsports specializes in graphics for Camaros, Challengers, Firebirds & Mustangs. We design, install and stock products for these cars. If you have an install question we do the installs on a regular basis and can help you with any questions. Also since that is all we stock we can ship the product out the same day (when ordered by 3 pm central time). We also have a 30 day no questions asked return policy, most companies do not take returns on this type of product. If you have decreased vision, be sure to return the product for a refund within the first 30 days. What is the difference between Lamin-x and the other products I find? This is the perfect "You get what you pay for" situation. Those cheap films are a thin 3 mil sticker type of film. That has a dull "orange-peel" finish, thin adhesive, no protection, and complete pain to install on any lights that have a compound curve. Lamin-x is the complete opposite of that cheap stuff. Glossy finish, forgiving adhesive, protection, and designed to mold around complex curves. See below for more information. Lamin-x is made in the USA. Learn more at www.lamin-x.com Can the film be removed without damage? Lamin-x protective film can be easily removed without damage to the light or original paint. Upon initial application, the film can be pulled back up and reapplied numerous times if not installed correctly. The film and adhesive are forgiving enough for this. Once the film has settled (appx 48-72 hours), the product is not considered reusable. Upon removal, warm the film and lift off slowly. If there is any additional adhesive left on the lens, simply rub the adhesive with Bug and Tar remover or similar product. Are your colored films legal on headlights for street use? Our colored films may or may not be legal for street use of primary lighting. Please check your state or local laws before application. Installation of colored Lamin-x Film on your primary lights is done so at your own risk. Is the material difficult to install? No, we offer free installation at our Fort Worth, Texas location. You just mist the adhesive side with water and use the supplied squeegee to smooth out any bubbles. Some applications require a little bit of heat from a heat gun or hair dryer to help the material conform to a curve. Click here for install videos on a 2010 Camaro. Recent Install. There are still some tiny bubbles and milkiness underneath, as well as creases/ripples on top of the film. What should I do? Once the film settles, any small bubbles/milkiness or application creases will disappear. Lamin-x is a breathable PVC vinyl film. Tiny air pockets will evaporate. The creases/ripples caused by application cards or your finger will smooth out once settled and warmed. What is your return policy? Return the product to Big Worm Motorsports within the first 30 days for a refund (everything but shipping charges) if you have any visibility or other problems. How long will the material last? Lamin-x Protective Films guarantees its products for five years from the date of purchase. The products are guaranteed against defective materials and workmanship, such as drying, fading, burning. This guarantee is null and void if the products have been improperly handled or applied. Neither the seller nor the manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use or inability to use the products. If the products are not proven to conform to specifications, the manufacturer's obligations shall be to replace it at no cost to the purchaser. All expressed or implied rights, warranties, guarantees, or conditions, statutory or otherwise, are excluded. The foregoing may not be altered, except by agreement signed by the buyer and seller, and is void where prohibited by law. |
|||
|
|
|||
|
We are confident in the combination
of quality, durability and customer service, that we invite you to
compare us with our competitiors. |
|||
|
Lamin-X |
Spray-on Tint |
Plastic Covers |
|
| Protects Lens From Damage |
X |
X | |
| Variety Of Color Options |
X |
||
| Long Term Warranty | X | X | |
| Optically Transparent | X | ||
| Easily Removable | X | X | |
| Forgiving Installation | X | X | |
| Installs Easy On Curvy Lights | X |
X |
|
| Glossy Smooth Surface | X | X | |
| Strong & Durable Product | X | ||
| OEM Approved | X | ||
| Self Healing Product | X | ||
| Direct Customer Support | X | ||
|
Please check your local laws - may or may not be legal on street legal vehicles in your state |
|||
|
|
|||
|
|
|
|
|
|
|
|||
|
||
| GoDaddy
|
2010 thru 2012 Camaro -
Tinted Tail Lights - fog light tint |
|
